650XLJS 100mm
650X Extended Barrel CNC Spindle Series
100mm
The powerful 650XLJS (100 mm) with the reach for deep pockets, robotic face or edge milling, or finishing operations up to 1.4 HP (1.04 kW) at 25,000, 30,000, or 40,000 RPM. The 650XLJS (100 mm) accelerates feed rates and cuts cycle times. In 24 hour operation, the patented governed high-speed 650XLJS (100 mm) delivers constant high speed and torque under load with high reliability and accuracy as a result of its low friction power unit with few moving parts. Plenty of power to speed up your inches cut per minute. High cutting speeds are maintained at the periphery of your end mill or bur using the 650X’s unique governed performance to achieve a faster cycle time, a cleaner finished surface, and more production on your CNC. Longer endmill life results from faster cutting with a light pass and no gears, vanes, or brushes to burn up. X = Double Turbine Power. No Duty Cycle.
| 650XLJS (100mm) Specifications | |||
| Speed RPM | 25,000 | 30,000 | 40,000 |
| Power Rating hp (Kw) | 1.2 (0.90) | 1.3 (.98) | 1.4 (1.04) |
| Inlet Air Pressure | 90 psi (6.2 bar) | ||
| Air Consumption Idle cfm (l/s) | 16 (7.56) | 17 (8.02) | 18 (8.49) |
| Air Consumption Working Flow (l/s) | 19 (8.97) - 40 (18.89) | ||
| Sound Level | Less Than 78 dBA | ||
| Max Shank Capacity | ER 11 - 1/4” (6mm) | ||
| Spindle Weight | 96 oz (2.72 kg) | ||
Reach into deep pockets with 1.4 HP with the Air Turbine Extended Barrel CNC Spindle Series
650XLJS 100 mm Dimensions
All fittings, couplings, and hoses must have a minimum of 10 mm internal diameter.
| 650XLJS (100 mm) Dimensions | |||
| A | 1.08” (27.52 mm) | D | 5.27” (133.89 mm) |
| B | Ø 1.62” (41.16 mm) | E | 8.83” (224.32 mm) |
| C | Ø 3.22” (81.75 mm) | F | 10.82” (274.8 mm) |
| 650XLJS (100 mm) Dimensions | |
| A | 1.08” (27.52 mm) |
| B | Ø 1.62” (41.16 mm) |
| C | Ø 3.22” (81.75 mm) |
| D | 5.27” (133.89 mm) |
| E | 8.83” (224.32 mm) |
| F | 10.82” (274.8 mm) |
Equipment
Included Equipment
Standard Equipment
ER 11 collet system (1/4” or 6 mm collet standard – other sizes optional). 3/4” or 20 mm shank standard (Metric shank comes with metric collet, inch shank with inch collet). Oil-free 90 psi / 6.2 bar, clean, dry air supply required.
| Accessories Models | Part # |
|---|---|
| High Flow Filter / Regulator / Extractor with 1/2” NPT | 30084 |
| Tube 16mm O.D. - 10mm I.D. (order by foot) | 16516 |
| Hose & Fitting - 16mm O.D. - 10mm I.D. - 12’ | 30047 |
We retrofit any CNC machine to mill at a constant high speed 24/7 – so any CNC can be a high-speed machine. This includes, but isn’t limited to DMG MORI, Haas, Fanuc Robodrill, Doosan, Hermle, Hurco, GROB, Brother Okuma, Makino and Mazak. Easy installation using selectable air feed inlets – choose side inlet NPT / Stop Block or center through shank/tool holder air feed. HSK, CAT, BT, and DIN Toolholder options are available. Learn more about Air Turbine Spindles on your CNC Machine by visiting their page at the links below.
| ER11- 1/4" | ER11- 6mm | ||
|---|---|---|---|
| Speed RPM | Part # | Speed RPM | Part # |
| 25,000 | 64942 | 25,000 | 64943 |
| 30,000 | 64944 | 30,000 | 64945 |
| 40,000 | 64946 | 40,000 | 64947 |
