602NS

602 CNC Spindle Series

Compact, the 602NS delivers governed constant high speeds under load. Rated speeds are 40,000, 50,000, and 65,000. Ideal for engraving, marking, slotting, drilling, and finishing with small tools the 602 speeds up cycle times — cutting cost and accelerating production. The 602 ‘NS features no shank and air feed from the rear position.

Air Turbine Spindles®. patented motors maintain high speed while cutting with no gears, vanes, or brushes to burn up. Using dry clean, oil-free, 90 psi (6.2 Bar) compressed air the 602 requires no lubrication and emits no oil mist. With fewer moving parts and low friction and utilizing ceramic bearings, the 602 is a precise and reliable favorite. No Duty Cycle.

602NS Specifications
Speed RPM40,00050,00065,000
Power Rating hp (Kw)0.15 (0.11)0.2 (0.15)0.2 (0.15)
Inlet Air Pressure90 psi (6.2 bar)
Air Consumption Idle cfm (l/s)4.5 (2.1)4.5 (2.1)4.5 (2.1)
Air Consumption Working Flow (l/s)5(2.36) - 6(3.30)
Sound LevelLess Than 78 dBA
Max Shank CapacityER 8-1/8"(3mm)
Spindle Weight21.6 oz (0.61kg)

602NS Dimensions

602NS Dimensional Drawing
602NS Dimensions
A0.6875" (17.4mm)
B1.56” (40mm)
C4.5” (114.3mm)

Equipment

Included Equipment

Spindle
Combo Filter Extractor (p/n #30008)
Collet
Wrenches
Hose
Fittings
Plug (for alternate air inlet not in use)
Carrying Case

Standard Equipment

ER 11 collet system (1/4” or 6mm collet standard – other sizes optional). 3/4” or 20mm shank standard (Metric Shank comes with metric collet, Inch Shank with inch collet). Oil-free 90 psi / 6.2 bar, clean, dry air supply required.

Accessories ModelsPart #
High Flow Filter / Regulator / Extractor30008
Tube 10mm O.D. - 6.5mm I.D. (order by foot)16508
Hose & Fitting - 10mm O.D. - 6.5mm I.D. - 12’30043

We retrofit any CNC machine to mill at a constant high speed 24/7 – so any CNC can be a high-speed machine. This includes, but isn’t limited to DMG MORI, Haas, Fanuc Robodrill, Doosan, Hermle, Hurco, GROB, Brother Okuma, Makino and Mazak. Easy installation using selectable air feed inlets – choose side inlet NPT / Stop Block or center through shank/tool holder air feed. HSK, CAT, BT, and DIN Toolholder options are available. Learn more about Air Turbine Spindles on your CNC Machine by visiting their page at the links below.

ER8- 1/8"ER8- 3mm
Speed RPMPart #Speed RPMPart #
40,0006550040,00065501
50,0006550250,00065503
65,0006550465,00065505

Videos

Brass Milling at 504”/min on Haas TM-2 by Air Turbine Spindles® 65,000 rpm 602JS

Painted Aluminum milled at 180"/min on Fadal CNC by Air Turbine Spindles® 65,000 rpm 602JS

Aluminum Engraving at 25”/min on Haas Mini Mill by Air Turbine Spindles® 65,000 rpm 602CAT40

Service & Support

Support is always available from our technical team in the USA and Germany. Repair Service is available in Florida and Munich. Call our factory technicians at +1-561-994-0500 or email us at [email protected].