• English Catalogs
  • České Katalogy
  • Suomen Kuvastot
  • Catalogues Français
  • Deutsch Kataloge
  • Cataloghi Italiani
  • 日本の出版物
  • 한국어 간행물
  • Catálogos Portugueses
  • русский каталог
  • Catálogos Españoles
Application Case Studies - High Speed Spindles
Milling Steel on DMG Mori HSC55 in Munich, DE

Comparison of cycle time and the surface quality. Standard Spindle v. Air Turbine Spindles® - 50% time reduction.....Learn More >
Robotic Precision Machining- Drilling on Fanuc Robot

Air Turbine Spindles® patented 50,000 rpm 625LJS is mounted in a stationary fixture to drill and edge finish aluminum parts with precision non-stop by our distribution partners, Uno Corporation in Japan.....Learn More >
Hermles C22U mills a complex lens mold at 1600mm/min

Pictured left Air Turbine Spindles® powerful 0.88 hp 650HSK loaded automatically from the Hermle C22U magazine and milled 0.5mm stock at governed constant 40,000 rpm with no duty cycle or thermal effects. . ....Learn More >
Upgrading of a conventional machne to 40,000 rpm in Costa Rica

At Mecanizados Mofama S.A.’s plant in San José, Costa Rica Air Turbine Spindles® governed 0.80 hp 40,000 rpm 625XJS was put to a tough test in 28-32 HRC Steel....Learn More >
Case Studies in cycle time reduction. From 1+ hour to 8 minutes

Peck Drilling showerhead holes on a Fanuc Robodrill at 70"/min (1778mm/min): A tough application with micro drills requiring super precision. Each hole took only 12 seconds.....Learn More >
Test Comparison: CNC Main Spindle v. Air Turbine Spindles®

The Result: More than 100% Improvement in cycle time. 88 Minutes program time for the Clockface milled by the Haas CNC Machine Spindle. 35 Minutes program time for the Clockface on the Air Turbine Spindles® 635CAT. ....Learn More >
Bonded Carbon Fiber Wing Machining - Flying S Inc

Mr. Peter Bowman is in charge of part fabrication at a successful manufacturer of aerospace components, Flying S Inc, located inPalestine, Illinois. Flying S Inc was founded by Mr. David Shaw....Learn More >
Dramatic insert cost reduction

Stainless Steel 316L engraving at 40,000 rpm on a Haas GR Router at Innovation Industries, Inc. Arkansas - 4X increase in insert life. ....Learn More >
Brass Mold Milling accelerated 800% on Haas TM-2

Air Turbine Spindles® patented governor increases air flow on demand. The difference: Spindle speed remains close to rated speeds at 25,000 rpm to 90,000 rpm with power - up to 1.4HP....Learn More >
Air Turbine delivers speed for Micro 100®. 500"/min: Pocket Milling Brass

"Air Turbine Spindles® greatly increase the inches per minute our end mills can advance – and operate with negligible thermal effects for nearly 0µ growth - as being optimal for coating performance.” ....Learn More >
Test Milling: 15 Hours saved on a Mold at 50,000 RPM in Germany

At 6 meters per minute (236 inches per minute) and governed 50,000 rpm Air Turbine Spindles® 625CAT40 saves 15 hours on an aluminum mold for an automotive dashboard....Learn More >
Faster Mold Milling in Hard Steel - 650 IPM in RC62 with 650CAT

Advancing 650"(16.5M) per minute milling RC62 tool steel, the powerful 40,000RPM 0.8HP 650CAT (pictured left) reduces production time....Learn More >
5 Axis Milling at 40,000 RPM on Tri-Tech M5414!

A 650 spindle at 40,000RPM (pictured left) was used on the Tri-Tech M5414 5-axis head to mill in a tire mold....Learn More >
Autochange for Constant 25,000 - 90,000 RPM - TMA

Air Turbine power ratings are in HP and kW, not feeble Watts, and will save hours on your machining programs because Air Turbine speeds stay high under load....Learn More >
These air turbine spindle, air turbine tools, air turbine motors are all products of air turbine technology, inc. Designed to out perform the cnc spindle or cnc machine spindle with a revolutionary pneumatic motor, air turbine spindles are designed to work with chiron, dmg moro seiki, doosan, fadal, emco, haas, hardinge, hartford, hermle, hurco, hwacheon, kitagawa, makino, mazak, okuma, romi and many other cnc machines. Also compatible with brother, fanuc, haas, matrix and other drill-tap machines for cnc milling with our high speed precision pneumatic air spindles. Our air turbine motors are high speed, efficient, pneumatic motors. These pneumatic motors are designed for lathe, robot, machining, debarring, finishing, routing, drilling and milling, a very versatile fixture mount. We also manufacture air turbine hand tools that are engraving tools, finishing tools, grinders, pencil tools, routing tools and marking tools. Air Turbine manufactures hand tools, grinders, pencil tools, debarring tools, finishing tools, which are all low vibration tools, precision tools, and ergonomic tools. These tools are performance tools, low weight tools, with an air turbine motor. Air Turbine motors require no oil, have no gears or vanes, for reliability. Made in USA.
All prices in US Dollars, FOB., Boca Raton, Florida, USA. International local pricing will vary, depending on location, to include: shipping, freight, handling, customs and excise duties, local taxes and handling, currency exchange rates, etc. All specifications approximate.