![]() Pictured above Air Turbine Spindles® powerful 0.88 hp 650HSK loaded automatically from the Hermle C22U magazine and milled 0.5mm stock at governed constant 40,000 rpm with no duty cycle or thermal effects. See video of Air Turbine Spindles® 650 milling this this steel lens mold in the Video section below. The mirror finish (pictured below) was achieved at a feed rate is 1600mm/min with a step over of 0.01mm with a Mitsubishi 1mm ball CBN end mill. ![]() Mr. Gunther Schnitzer and Mr. Matthias Koehler (pictured below) programmed this demonstration illustrating Hermle machines' superior performance and finish in multi axis programs - for which this CNC builder is recognized as the world leader. To see the 650 Series specifications Click Here. Extra power double turbine X Series spindles available with power to 1.4 hp (1 kW). ![]() Click Here to see video of Air Turbine Spindles® constant governed 65,000 rpm 602HSK loading automatically from the CNC magazine, as pictured below. ![]() The clip and images above illustrate full integration of direct drive governed high speeds in the programing and watch the 65,000 rpm 602HSK engrave a mold below. Just connect to a clean airline supplying 90 PSI / 6.2 Bar to the center air feed in the spindle. ![]() To see the 602HSK specifications Click Here. ![]() To view Hermle’s exceptional products visit: www.hermlemachine.com Call Hermle in the USA: Manuel Merkt on 414-376-6332 Email: mmerkt@hermlemachine.com Whether your machine is CAT, SK40, BT or HSK configuration Air Turbine Spindles® will transform your CNC into a high speed machine from $3,800. Call +1.561.994.0500 to arrange a demonstration with no obligation. |