740MX
Sealed Steel Series
The powerful 740MX is a lightweight motor with power to maintain high speed on your tool path. The direct drive turbine does operations 24/7 with great durability. The rigid steel housing enables you to mount anywhere and is sealed for contaminated environments.
Get governed high speed under load, not speeds that drop when your tool starts cutting. Eliminate lubrication, vanes, gears and brushes and accelerate your production rate.
Mountable area of Ø 40mm OD by 133mm. Completely sealed with hose exhausts.
740MX Specifications | |||
Speed RPM | 40,000 | 50,000 | 65,000 |
Power Rating hp (Kw) | 0.3 (0.22) | 0.4 (0.30) | |
Inlet Air Pressure | 90 PSI (6.2 Bar) | ||
Air Consumption Idle cfm (l/s) | 5 (2.63) | 6 (2.83) | |
Air Consumption Working Flow (l/s) | 7 (3.30) - 10 (4.72) | ||
Air Hoses and Fittings Minimum Size | 6mm ID | ||
Sound Level | Less Than 78 dBA | ||
Max Shank Capacity | ER 11 - 1/4” (6mm) | ||
Motor Weight | 34 oz (0.96 kg) |
740MX Dimensions
All fittings, couplings, and hoses must have a minimum of 6mm internal diameter.
740MX Dimensions | |||
A | 1.00” (25.40mm) | C | 5.25” (133.35mm) |
B | Ø 1.57 (40.00mm) | D | 7.00” (177.80mm) |
Equipment
Included Equipment
Standard Equipment
ER 11 UP Collet System (1/4” or 6mm collet.)
Oil-free 90 psi / 6.2 bar clean, dry air supply required.
Accessories Models | Part # |
---|---|
Low Flow Filter Regulator / Extractor | 30006 |
Tube 10mm O.D. - 6.5mm I.D. (order by foot) | 16508 |
Hose & Fitting - 10mm O.D. - 6.5mm I.D. - 12’ | 30043 |
ER11 - 1/4” | ER11 - 6mm | ||
---|---|---|---|
Speed RPM | Part # | Speed RPM | Part # |
40,000 | 70114 | 40,000 | 70115 |
50,000 | 70118 | 50,000 | 70119 |