725MX
Sealed Steel Series
Despite its 25mm outside diameter, the 725MX has up to 0.40 hp to maintain your cutting tool’s high rotational speed at 40,000 or 50,000 rpm. The higher production rates you achieve with the 725MX will surprise you.
Air Turbine Motors® patented double direct drive in the 725MX does not get hot or vibrate. The air cools the sealed grease-packed bearings. The result is durability in 24/7 operation with no maintenance and no control system.
Mountable area of Ø 25mm OD by 39mm. Completely sealed with hose exhausts.
725MX Specifications | ||
Speed RPM | 40,000 | 50,000 |
Power Rating hp (Kw) | 0.30 (0.22) | 0.40 (0.30) |
Inlet Air Pressure | 90 PSI (6.2 Bar) | |
Air Consumption Idle cfm (l/s) | 5 (2.36) | 6 (2.83) |
Air Consumption Working Flow (l/s) | 7 (3.30) - 10 (4.72) | |
Air Hoses and Fittings Minimum Size | 6mm ID | |
Sound Level | Less Than 78 dBA | |
Max Shank Capacity | ER 11 - 1/4” (6mm) | |
Motor Weight | 22 oz (0.62 kg) |
725MX Dimensions
All fittings, couplings, and hoses must have a minimum of 6mm internal diameter.
725MX Dimensions | |||||
A | 1.09” (27.61mm) | C | 2.53” (64.38mm) | E | Ø 1.57” (40.00mm) |
B | Ø 1.00” (25.40mm) | D | 1.53” (38.98mm) | F | 5.23” (179.58mm) |
Equipment
Included Equipment
Standard Equipment
ER 11 UP Collet System (1/4” or 6mm collet.)
Oil-free 90 psi / 6.2 bar clean, dry air supply required.
Accessories Models | Part # |
---|---|
Low Flow Filter Regulator / Extractor | 30006 |
Hose 10mm OD - 13’ | 30076 |
Hose & Fitting - 8mm O.D. - 5mm I.D. - 12’ | 30041 |
ER11 - 1/4” | ER11 - 6mm | ||
---|---|---|---|
Speed RPM | Part # | Speed RPM | Part # |
40,000 | 70150 | 40,000 | 70151 |
50,000 | 70152 | 50,000 | 70153 |