200SV

Straight Hand Tool Series

1/8” / 3mm Capacity

If you like an inkpot shape the super ergonomic 200SV Series is the tool for you. The 200SV delivers power at 0.20 hp (0.15 kW) at governed 50,000 rpm.That’s the difference. Governed high speed stays high when you cut. You will increase your productivity and improve finish quality – remember coated cutting tools only work well at high speed Compact and easy to grip the 200SV weighs only 5.4 oz (0.15 kg). Low vibration magnitude of 1.67 m/s² r.m.s makes non-stop work easy – with reduced hand-arm stress. Only a light hand is needed to guide this 50,000 rpm tool as “speed does the cutting”. Our patented automatic brake option stops the 200SV in seconds.

200SV Specifications
Speed RPM50,000
Power Rating hp (kW)0.20 (0.15)
Inlet Air Pressure90 PSI (6.2 Bar)
Air Consumption Idle cfm (l/s)4 (1.88)
Air Consumption Working Flow cfm (l/s)6 (2.83) - 9 (4.24)
Sound LevelLess Than 67 dBA
Max Shank Capacity1/8" (3mm)
Hand Tool Weight5.4 oz (0.15 kg)

200SV Dimensional Drawing

200SV Dimensions
A 0.64″ (16.37mm)
B 0.74″ (18.79mm)
C 1.22″ (30.99mm)
D 5.64″ (5.64mm)

Hand Tool, 1/8” or optional 3mm collet, collet wrenches, rear exhaust. Exhaust deflector, 5’ air supply assembly with slide valve, and 1/4” NPT air supply fitting. Oil-free 90 psi / 6.2 bar, clean, dry air supply required.

Accessories Models Part #
Low Flow Filter 30002
Low Flow Filter / Regulator 30001
5’ Air Supply Assembly w/Fitting for SV Models 32107

200SV Vibration Statistics
Time to reach EAV 2.5 m/s² A(8) 17 hours, 58 minutes
Time to reach ELV 5 m/s² A(8) 71 hours, 50 minutes
Vibration magnitude m/s² r.m.s 1.67

1/8″ 3mm
Speed RPM Part # Speed RPM Part #
50,000 32060 50,000 32061

1/8″ w/break 3mm w/break
Speed RPM Part # Speed RPM Part #
50,000 32062 50,000 32063

Service & Support

Support is always available from our technical team in the USA and Germany. Repair Service is available in Florida and Munich. Call our factory technicians at +1-561-994-0500 or email us at [email protected].