• English Catalogs
  • České Katalogy
  • Suomen Kuvastot
  • Catalogues Français
  • Deutsch Kataloge
  • Cataloghi Italiani
  • 日本の出版物
  • Catálogos Portugueses
  • русский каталог
  • Catálogos Españoles
Hand Tools

Ready to go Precision Tool and Bur Combo Cases

EVERYTHING YOU NEED TO CUT OPERATOR STRESS

These nine kits include an Air Turbine Tool® and the Best Carbide bur or router bits ready to go. All necessary equipment including the air supply assembly, filter regulator and air supply fitting are included in one convenient combo case so you can get started right away. Just connect 90 PSI.

Maximum cutting performance is only achieved when the carbide grade characteristics are engineered to perform in your unique application. Best Carbide delivers high speed cutting precision, stock removal, and finishing.


 
 

201SV Combo Case

Features Best Carbide Mini Bur Kit

Only a light hand guiding the powerful 201SV is needed to get our signature benefits - improved precision, faster cutting action and finer finished surface quality. Ultra low vibration and light-weight prevents fatigue and hand-arm injury. The tool is also quiet, at <67 dBA, protecting your hearing.

  • No gears, vanes, or brushes to vibrate or heat up.
  • Direct drive reliability – no maintenance.
  • No oil mist - just connect 90psi 6.2 Bar dry air.

Learn More about the 201SV Combo Case with Best Carbide Mini Bur Kit


 
 

0145SSV Combo Case

Features Best Carbide Mini Bur Kit

Put the 0145SSV in your fingers or palm and experience exceptionally fine control necessary for close proximity work. Effective for precision work, marking or deburring. Our patented 45° design conforms to the natural position of your hand for hand eye coordination.

  • Feather-light at 6 oz (0.17 kg), 0.2HP.
  • No gears, vanes, or brushes to vibrate or heat up.
  • Direct drive reliability with only 2 moving parts.
  • Low vibration reduces stress and injury risk.
  • No oil mist sprays, just connect 90psi clean air.

Learn More about the 0145SSV Combo Case with Best Carbide Mini Bur Kit


 
 

206XSV Combo Case

Features Choice of General Purpose Bur Kit
or Nonferrous Bur Kit from Best Carbide

The powerful 206XSV is quiet and you’ll immediately notice its ultra low vibration magnitude: Just 1.43 m/s2 r.m.s. The governed high speed 206XSV stays at constant 50,000 rpm under load. No heat or lubrication required. Now you can replace heavy noisy vibrating tools requiring lubrication and maintenance with the tools of a new generation®.

  • Get direct drive reliability with no maintenance.
  • Eliminate operator stress and working time limits.
  • Just connect 90 psi, 6.2 Bar dry air2
  • No lubrication required

206XSV with General Purpose Bur Kit

206XSV with Nonferrous Bur Kit


 
 

525SV Combo Case

Features Choice of General Purpose Bur Kit
or Nonferrous Bur Kit from Best Carbide

The 525SV Straight tool has revolutionary comfort, superior surface quality and maintains high speed while in cut. This tool has 0.45 HP for deburring, part cleaning, deflashing or weld removal. Constant governed high speed doesthe cutting, so the operator does not need to use pressure, eliminating stress and CTS injury risk.

  • No oil mist sprays, just connect 90psi dry air.
  • Direct drive reliability – no maintenance.
  • Light-weight, low vibration, no heat.

525SV with General Purpose Bur Kit

525SV with Nonferrous Bur Kit


 
 

230DM Combo Case

Features Choice of General Purpose Bur Kit
or Nonferrous Bur Kit from Best Carbide

Almost silent, this light tool shows the power and superiority of the governed turbine. The 230DM incorporates heavy duty bearings and has collet capacities of 1/4” or 6mm. For use in heavy-duty applications where hard use is expected for graphite finishing or Kevlar cutting, die polishing, removing welds or foundry work.

  • Get direct drive reliability with no maintenance.
  • Reduced fatigue, hand arm stress and carpal tunnel injury risk.
  • Just connect 90 psi, 6.2 Bar dry air.
  • No lubrication required.

230DM with General Purpose Bur Kit

230DM with Nonferrous Bur Kit


 
 

310RXDM Combo Case

The 310RXDM maintains high speed routing at 40,00 RPM with up to 1.4 hp power on demand. Wood, plastics and fiberglass are cut faster and cleaner at governed 40,000 rpm with less fiber break-out. Trigger switch control.

  • Direct drive reliability – low heat, low weight, no maintenance.
  • Low vibration and low weight reduce hand stress injury risk with only a light hand needed.
  • Oil-free mechanism results in no oil misting or part contamination, no lubrication.
  • Just connect 90 psi.

310RXDM with Fiberglass Router Kit

These air turbine spindle, air turbine tools, air turbine motors are all products of air turbine technology, inc. Designed to out perform the cnc spindle or cnc machine spindle with a revolutionary pneumatic motor, air turbine spindles are designed to work with chiron, dmg moro seiki, doosan, fadal, emco, haas, hardinge, hartford, hermle, hurco, hwacheon, kitagawa, makino, mazak, okuma, romi and many other cnc machines. Also compatible with brother, fanuc, haas, matrix and other drill-tap machines for cnc milling with our high speed precision pneumatic air spindles. Our air turbine motors are high speed, efficient, pneumatic motors. These pneumatic motors are designed for lathe, robot, machining, debarring, finishing, routing, drilling and milling, a very versatile fixture mount. We also manufacture air turbine hand tools that are engraving tools, finishing tools, grinders, pencil tools, routing tools and marking tools. Air Turbine manufactures hand tools, grinders, pencil tools, debarring tools, finishing tools, which are all low vibration tools, precision tools, and ergonomic tools. These tools are performance tools, low weight tools, with an air turbine motor. Air Turbine motors require no oil, have no gears or vanes, for reliability. Made in USA.
All prices in US Dollars, FOB., Boca Raton, Florida, USA. International local pricing will vary, depending on location, to include: shipping, freight, handling, customs and excise duties, local taxes and handling, currency exchange rates, etc. All specifications approximate.