• English Catalogs
  • České Katalogy
  • Suomen Kuvastot
  • Catalogues Français
  • Deutsch Kataloge
  • Cataloghi Italiani
  • 日本の出版物
  • 한국어 간행물
  • Catálogos Portugueses
  • русский каталог
  • Catálogos Españoles
One Year Limited Warranty - Precision Tool Products

Air Turbine Tools, Inc. (ATT) warrants to the end user that ATT tool products (other than accessories) are free from manufacturing defects in material or workmanship when new for a period of 365 days from the date of original purchase from ATT if used in compliance with directions in the manufacturer’s instructions and user notes.

ATT tool products must only be operated using 90 psi, 6.2 bar, clean, dry, oil-free air, free of debris or other contaminants at the specified flow rate without restrictions on airflow. Accessory filter/extractors are available.

In case of manufacturing defects in material or workmanship, ATT agrees to repair (remedy) a defective tool without charge. In no event shall ATT be obligated to compensate end user beyond cost of repair or replacement of the tool. It is the customer’s responsibility to ensure the tool is operated in a safe manner and in accordance with applicable instructions and user notes with appropriate speed rated cutting tools.

User Note: Always use eye protection. Ensure your air supply is off before installing your ATT product.

To be covered under this warranty, the tool must be inspected at the ATT plant and found not have been abused, crashed, dropped or stopped suddenly or affected by contamination or aggressive programming. Any repairs attempted must be made only by ATT or its current trained Authorized International Distributor, using ATT parts. Proof of date and source of purchase must be provided and a warranty registration card must be returned to ATT within 30 days of purchase by end user for this warranty to take effect. End user assumes all costs incurred in shipping tool(s) to and from ATT. This warranty does not apply in case of use of inappropriate applications or cutting tools (See ATT User Notes) unsuited to the tool or which generate excess wear or vibration due to the process or material involved. This is a warranty of compliance and specifications when new and not a warranty of life and service.

No responsibility is assumed for incidental or consequential loss or damage; nor damage due to misuse or abuse or any non-factory repairs, inappropriate cutting tools, or attachments or mounting of tools.

This Warranty is void if the tool product is opened or serviced by anyone other than ATT or its current Authorized International Distributors using only ATT parts and repair tools and manuals. This warranty is also void if the tool has been abused, dropped or subjected to exceptionally heavy wear or contains oil, water, dirt or other contaminants. Bearing wear-out is not warrantied. The cause and damage will be evaluated and determined at ATT’s discretion and an inspection report will be provided upon request.

This warranty shall be governed and construed in accordance with the laws of the State of Florida, USA and all disputes shall be submitted to the exclusive jurisdiction of, and heard by, the courts of the State of Florida.

ATT provides a one year limited warranty on the precision tool products it manufactures. Accessories are warranted by their respective manufacturers. To validate your warranty, return your warranty registration card promptly and avoid any actions which could invalidate your warranty.

Warranty Registration
Click Here to Register Your Warranty Online
Click Here to Download Your Warranty Registration as a PDF.
These air turbine spindle, air turbine tools, air turbine motors are all products of air turbine technology, inc. Designed to out perform the cnc spindle or cnc machine spindle with a revolutionary pneumatic motor, air turbine spindles are designed to work with chiron, dmg moro seiki, doosan, fadal, emco, haas, hardinge, hartford, hermle, hurco, hwacheon, kitagawa, makino, mazak, okuma, romi and many other cnc machines. Also compatible with brother, fanuc, haas, matrix and other drill-tap machines for cnc milling with our high speed precision pneumatic air spindles. Our air turbine motors are high speed, efficient, pneumatic motors. These pneumatic motors are designed for lathe, robot, machining, debarring, finishing, routing, drilling and milling, a very versatile fixture mount. We also manufacture air turbine hand tools that are engraving tools, finishing tools, grinders, pencil tools, routing tools and marking tools. Air Turbine manufactures hand tools, grinders, pencil tools, debarring tools, finishing tools, which are all low vibration tools, precision tools, and ergonomic tools. These tools are performance tools, low weight tools, with an air turbine motor. Air Turbine motors require no oil, have no gears or vanes, for reliability. Made in USA.
All prices in US Dollars, FOB., Boca Raton, Florida, USA. International local pricing will vary, depending on location, to include: shipping, freight, handling, customs and excise duties, local taxes and handling, currency exchange rates, etc. All specifications approximate.